Specification | ||
---|---|---|
Standard Cutting Range | 25mm ID To 89mm OD | 1 " ID To 3 1⁄2 " OD |
Optional Shaft 1 | 12mm ID To 19mm ID | 1⁄2" ID To 3⁄4" ID |
Optional Shaft 2 | 19mm ID To 25mm ID | 3⁄4" ID To 1" ID |
Cutter Feed | 40mm | 1 1⁄2" |
Motor Power - Pneumatic | 630W, 0.85 Hp | 6 Bar, 40 Cfm |
Machine Weight - Pneumatic | 8 Kg | 17 1⁄2 Lbs |
Drawing on our vast experience in the production of tube bevelling equipment this machine offers several improvements over our previous machines.
A completely new pneumatic motor provides equivalent power and torque in a smaller, lighter package. A further benefit of this motor is a reduction in operational noise levels. The new motor, coupled with the revised throttle also allows the operator greater control over the machine’s cutting speed.
The machine is offered with a hand wheel feed mechanism as standard. This provides the operator with greater ‘feel’. When paired with the improved speed control this allows the skilled operator to ‘balance’ his cut to obtain the best possible finish in the minimum time.
The Cutter head design utilises modern work-holding technology to reduce the time needed to change cutters. This system also ensures optimum clamping of the cutter bit in any position within the head.
The machine utilises a torque reacted mandrel system which aligns and clamps to the internal diameter of the tube. As standard the machine is supplied with the mandrel system to cover 25mm to 89mm tube. Additional shafts are available to cover 12 to 19mm and 19 to 25mm.
Specification | ||
---|---|---|
Standard Cutting Range | 25mm ID To 115mm OD | 1 " ID To 4 1⁄2 " OD |
Optional Shaft 1 | 12mm ID To 19mm ID | 1⁄2" ID To 3⁄4" ID |
Optional Shaft 2 | 19mm ID To 25mm ID | 3⁄4" ID To 1" ID |
Cutter Feed | 40mm | 1 1⁄2" |
Motor Power - Pneumatic | 1500W, 2.0 Hp | 6 Bar, 60 Cfm |
Motor Power - Electric | 670W, 0.9 Hp | 110V or 240V |
Machine Weight - Pneumatic | 10 Kg | 22 Lbs |
Machine Weight - Electric | 10.5 Kg | 23 Lbs |
Drawing on our vast experience in the production of tube bevelling equipment this machine offers several improvements over our previous equivalent machine (the Super Hornet).
A completely new pneumatic motor provides equivalent power and torque in a smaller, lighter package. A further benefit of this motor is a reduction in operational noise levels. The new motor, coupled with the revised throttle also allows the operator greater control over the machine’s cutting speed.
The machine is offered with a hand wheel feed mechanism as standard. This provides the operator with greater ‘feel’. When paired with the improved speed control this allows the skilled operator to ‘balance’ his cut to obtain the best possible finish in the minimum time.
The Cutter head design utilises modern work-holding technology to reduce the time needed to change cutters. This system also ensures optimum clamping of the cutter bit in any position within the head.
The machine utilises a torque reacted mandrel system which aligns and clamps to the internal diameter of the tube. As standard the machine is supplied with the mandrel system to cover 25mm to 115mm tube. Additional shafts are available to cover 12 to 19mm and 19 to 25mm.
Specification | ||
---|---|---|
Full Cutting Range | 38mm ID To 171mm OD | 1 1⁄2" ID To 6 3⁄4" OD |
Shaft 1 Range | 38mm ID To 103mm ID | 1 1⁄2" ID To 4 " ID |
Shaft 2 Range | 96mm ID To 160mm ID | 3 4⁄5 " ID To 6 " ID |
Cutter Feed | 32mm | 1 1⁄4" |
Motor Power - Pneumatic | 1500W, 2.0 Hp | 6 Bar, 60 Cfm |
Motor Power - Electric | 670W, 0.9 Hp | 110V or 240V |
Machine Weight - Pneumatic | 12 Kg | 26 Lbs |
Machine Weight - Electric | 13 Kg | 29 Lbs |
Shaft 1 | 2 Kg | 4 1⁄2 Lbs |
Shaft 2 | 5 Kg | 11 Lbs |
This versatile midrange machine utilises torque reacted mandrels which align themselves on the inside of the work piece enabling the machine to cover a range of 38.5mm (1 ½”) to 172mm (6 ¾”) OD.
The Cobra 400 machine can also be used with Short Locking Units for machining short parallel pipe lengths and fittings.
A heavy duty worm and spur gear drive system combines a compact head design with smooth reliable power transmission.
Fitted with either an electric 110/240v or pneumatic motor the Cobra 400 has the ability to withstand the toughest working environments.
Specification | ||
---|---|---|
Full Cutting Range | 90mm ID To 305mm OD | 3 9⁄16" ID To 12" OD |
Shaft 1 Range | 90mm ID To 196mm ID | 3 9⁄16" ID To 7 3⁄4" ID |
Shaft 2 Range | 194mm ID To 300mm ID | 7 5⁄8" ID To 11 3⁄4" ID |
Cutter Feed | 32mm | 1 1⁄4" |
Motor Power - Pneumatic | 1500W, 2.0 Hp | 6 Bar, 60 Cfm |
Machine Weight - Pneumatic | 12 Kg | 26 Lbs |
Shaft 1 Weight | 25 Kg | 55 Lbs |
Shaft 2 Weight | 35 Kg | 77 Lbs |
The high power and torque of the newly developed pneumatic motor combined with heavy duty worm and spur gear drive provide a rugged reliable machine for working on large diameter or heavy wall tube (eg. 5 ½” Sched XX Heavy).
The motor provides the operator with a high degree of control over the cutting speed by means of an accurate leaver throttle, whilst keeping operational noise levels to a minimum.
The machine utilises a versatile torque reacted shaft system to align on the inside of the work piece. The entire range of the machine (64mm to 300mm ID) is covered with just 2 shafts, minimising the number of parts required.
The construction of the shaft system is such that the shaft and machine can be mounted to the tube together, or the shaft can be mounted first and the machine then loaded to the shaft in order to ease operations in overhead or confined spaces.
The Cutter head design allows the use of standard size HSS cutter bits or when machining Heavy Wall, thicker Heavy Duty cutters. For extreme applications a roughing cutter can be paired with a finishing cutter to reduce the cutting forces.